Methods to Fix The File is too Large for the Destination File System Windows Error

While using Windows, you would have possibly seen, or you see an error which states The File is too Large for the Destination File System USB Windows Error message. This occurs while you were transferring any single file which was too big (approximately over 4GB) to your storage device similar to pen drives, or even external hard disk, etc. This is the error you get once while arranging to transfer files to the associated external drive (portable drive, USB flash/thumb drive). Well, I know it’s annoying when you want to fix this issue desperately so that you can get the job done. So, let’s get straight to the purpose of why you’re obtaining this error even after clearing up your drive, to free enough available memory. The error message saying that The File is too Large for the Destination File System already NTFS keeps popping up then you are at the right place for an explanation.

This shows an error code message like,

Causes of The File is too Large for the Destination File System Error Issue:

You may raise yourself with a question, why you’re encountering this The File is too Large for the Destination File System already NTFS downside while transferring or sending to a pen drive, SD Card, or external disk or in a very native Winchester drive. And let me tell you there can be many reasons for this. The File is too Large for the Destination File System USB error to happen. The solution is incredibly straightforward. You are obtaining this large file size warning because it is programmed as FAT32 or FAT12 or something older than that. This is not retardant, as the storage device used is formatted in either FAT or FAT32 filing system. The maximum filesize for the big filing system is 2GB, and whereas for FAT32, the max file size can be 4GB. In our example, we’ve got a file with 5.6 GB in size. Therefore it cannot slot in the FAT32 filing system, and Windows displays the error message the file is too giant.’

Now, we will teach you how to create a storage device capable of allocating large file storage. Which will eventually sort The File is too Large for the Destination File System already NTFS issue of the file is too enormous.

Apart from FAT or FAT32, there are two alternative file systems such as exFAT and NTFS, which may read/write files of 4GB and make drive partition larger than 32GB. Suppose if the data size is 4GB in size, you need to have a memory device either formatted in exFAT or NTFS classification system for the Windows device to accept it. You have two selections, and you will be able to select either one of the two ways that support your demand.

How to Fix & Solve The File is too Large for the Destination File System Windows Error Issue

How to remove the error of The File is too Large for the Destination File System USB Windows PC Error problem –

It is still common, though, to see disks that are formatted with the FAT or FAT32 file systems that were developed before NTFS. All of these old file systems aren’t ready to handle larger file transfers. Although the announced disk capability sounds to be ample, it is the classification system that determines the scale of a file that may be traced there too.

1. Fix by Formatting Storage Drive –

When this The File is too Large for the Destination File System already NTFS without formatting circumstance arises, the matter could also be resolved by dynamical classification of the system on the drive. This is often accomplished by playing a FORMAT action on its drive. (This action destroys all information presented on it drive at the time, therefore if any information already on it drive is vital, it ought to 1st be traced to a different storage location.)

• Open Computer (This laptop or My Computer) also known as “Windows Explorer” or simply as “Computer.”
• Right-click on your pen drive, from the given context menu, take Format.’
• In the format window, select NTFS as a filing system. Then perform a fast format by pressing the Start button.
• Formatting pen drive from FAT32 to NTFS Now, you will store large-sized files on your pen drive.

*Note: Information can lose all of your existing information on your pen; Therefore, you must back up the data onto another drive before information.

2. Solution without Losing Data or Formatting –

This methodology can modify the classification system to NTFS without formatting the entire drive. So, your existing information will be okay. But still, I would recommend you to backup your files. After doing that, follow The File is too Large for the Destination File System Windows 10 guide steps below.

• First of all, Right-click on beginning (Windows brand Button) and opt for electronic communication (Admin).
• Now, Run a command like a convert: /fs: NTFS. Suppose, your problematic storage drive letter is D. So, the command will be like this.
  convert d: /fs:NTFS

Generally, it should work with no The File is too Large for the Destination File System USB issues. But, sometimes, it might raise your permission to try to do a forced dismount. In this case, just press Y and hit enter.

These two are the simplest and most convenient methods to overcome this The File is too Large for the Destination File System USB flash drive error, but there are some other methods which are described in brief below:

Other Methods (If you do not want the Data on your Drive to be Erased or Deleted):

• Compressing the Selected File –

You can decrease the file size by file mechanical device like WinRAR. Thus you will cut back the file size smaller than 4GB. (Try this The File is too Large for the Destination File System USB Windows 7 methodology if your file size is below 5GB, and select best compression possibility)

• By the Method of Splitting –

You can split your large-sized file into small items, then store them on the pen drive. While reaching the destination, you’ll be a part of the split files. HJSplit may be a sensible free splitter software system for file separation.

Conclusion:

So, these were few straightforward and easy steps to fix the error of The File is too Large for the Destination File System USB Windows PC Error problem And I have also mentioned few steps which can be followed to quickly convert the file which you want to transfer if you don’t want the data on your pen drive or another storage device to be removed. I hope you were able to solve your The File is too Large for the Destination File System already NTFS problem; if not, I am always here to help.

If you are getting or facing any type of any error problem while trying to fix The File is too Large for the Destination File System USB Windows PC issue, then comment down that error also here or directly email us.