Apple iPhone Stuck in Headphone Mode Water Damage Device error code is a common issue faced by iPhone device users nowadays mostly, and many iPhone users may get this type of error problem on their device in day-to-day life. This issue prevents users from hearing the sound. We are also not sure whether it is a bug on your iPhone device or a feature; from that, you are getting this error issue. Water damage may also affect this issue on your iPhone device even after it’s dried out & seems to be working again. If you have tried to restart it, did a soft reset, or plugged your headphones in or out again and again but couldn’t get rid of this error issue problem, then check and read this article once thoroughly. Sometimes your iPhone device thinks that your headphones are plugged in while they are not, and you are also sure that your headphones are not inserted on your iPhone device.
This shows an error code message like,
Apple iPhone Stuck in Headphone Mode Water Damage
This was preventing the users from hearing the sound & your iPhone also acts like that headphones are plugged in. If your iPhone device is still stuck on the headphones mode after your iPhone turns ON, then there might be an issue with your hardware too. So here we are going to show you how to get out of the stuck point of your headphones in the IOS. You may also get this error if some water gets in your headphone jack.
Causes of Apple iPhone Stuck in Headphone Mode Water Damage Error Issue:
- iPhone headphone jack issue
- Water or dust problem
So these below are some of the very best natural methods and solutions for fixing and solving this Apple iPhone Stuck in Headphone Mode Water Damage Device error problem issue from your iPhone device permanently. I hope these tips will undoubtedly be helpful for you on your device.
How to Fix & Solve Apple iPhone Stuck in Headphone Mode Water Damage Error Issue
1. Switch from Speaker System Back to Phone –
- Connect your iPhone via Bluetooth to the speaker system
- Play a Music
- Change from Speaker system back to the Phone
- That’s it
By switching from speaker system back to the phone can help you to get rid of this Apple iPhone Stuck in Headphone Mode water damage error issue.
2. Remove the Headphones & Check the Sound there –
- Plug in Headset when the phone is locked
- Hold down the Power button
You will get ‘Slide to Power OFF‘ bar - Remove the headphones
- Click on Cancel button there (At bottom screen)
- Now, check the sound there
- After completing, close any unwanted tabs
- That’s it, done
By removing the headphones and checking the sound, you can get back from this Apple iPhone Stuck in Headphone Mode water damage problem.
3. Try this below Method –
- Play a music
- Allow the iPhone to lock completely
- Insert the iPhone compatibility headset jack
- Unlock your iPhone
- Stop the Audio
- Unplug the jack there
- That’s it
By trying this above guide will help you to fix this type of Apple iPhone Stuck in Headphone Mode water damage issue.
4. Restart or Reset your iPhone Device once –
- Press & hold the Wake/Sleep & Home button together
- Wait until Apple Logo appears
- Now check it
- That’s it, done
By resetting or restarting your device once, you to get back from this Apple iPhone Stuck in Headphone Mode water damage problem.
5. Clean your iPhone Headphones Jack –
By cleaning the headphones, the jack can solve this type of Apple iPhone stuck-in Headphone Mode water damage error issue.
6. Update the IOS Software –
- Go to the settings
- Click on the General option
- Click on the Software Update option
- Select the Install Now option to install the latest updates
- After updating, close all tabs
- That’s it, done
By updating your IOS device software, you can get rid of this Apple iPhone Stuck in Headphone Mode water damage problem.
7. Reset all Settings from your iPhone Device –
- Go to the settings
- Click on the General tab
- Scroll down & click on Reset tab
- Select Reset All Settings
- Enter your Passcode to confirm it
- After resetting, close everything
- Restart your Device
- That’s it, done
By resetting all the settings from your device, you can get back from this Apple iPhone Stuck in Headphone Mode water damage issue.
8. Erase All Content & Settings –
- Go to the settings
- Click on the General settings there
- Click on Reset option there
- Click on Erase All Contents & Settings option
- Enter your passcode
- Click on Erase iPhone option
- After erasing, close all tabs
- Restart your device
- That’s it, done
By clearing all the contents and the settings from your device can help you get rid of this iPhone 6 stuck-in headphone mode problem.
9. Restore your iPhone to the Factory Settings using iTunes –
- Connect your iPhone to your MAC by using USB Cable
- Open the iTunes software
- Click on Summary option there
- Click on the Restore button
- After restoring, set up your iPhone
- That’s it, done
By using iTunes, restoring your iPhone to the factory settings can solve this issue.
10. Check some Settings –
- Go to the settings
- Click on the General tab
- Select the Accessibility option
- Scroll down to Interaction section
- Continue scrolling until you find Call Audio Routing
- Click on the Automatic option if it is not selected
- If it already has the automatic option selected then
- Click on the Speaker option once
- Now test it by placing a Call
- Check if your speaker is now working
- After that, Click back on the Automatic settings option again
- After completing, close all tabs
- That’s it, done
Check some settings from here can fix and solve this error problem issue.
11. Try the Airplane Mode Options once –
- Go to the settings
- Go to the Airplane Mode option
- Swipe to Turn ON the Airplane Mode
- Wait for some seconds
- After waiting, again swipe to Turn it OFF
- After completing, close all tabs
- That’s it, done
By trying the airplane mode options, you may fix this type of Apple iPhone stuck-in Headphone Mode Water Damage issue.
12. Contact Apple Support or Authorized Service Provider –
Contact the Apple Support team, or you can also contact the Official Apple Authorized Service Provider so that we can also fix this Apple iPhone Stuck in Headphone Mode water damage issue for you easily and quickly.
*Quick Tips –
- Unplug & Re-Plug iPhone headphones several times
(at least 5Â to 10 times) - Use a toothpick or hairdryer on iPhone headphones port to remove dust
- Use Q-tip also if you have
So here these above are some super easy methods from us to you so that you can get rid out of this Apple iPhone Stuck in Headphone Mode water damage Device error problem.
If you are facing any issues while trying these above methods for fixing & solving this error, Apple iPhone Stuck in Headphone Mode water damage Device problem, then Comment down the error problem, here below in the Comment section.
